Dave Friedman follows up his excellent 2-Channel Twin Tube IR-X Preamp with the Dirty Shirley / Twin Sister IR-D Equivalent
Amp and Cab IR SimAmpsFloor-AmpFriedman AmplifcationFriedman EffectsPreAmpTube Amp+-
I covered the IR-X back on September 28th - marking what a rip-roaring success it was - combining an all-analog Twin 12AX7 Tube Preamp with DSP Emulated Power Amp and Cab IR’s.
The control topology of the two pedals is nigh identical, with a few subtle differences, including Dual Bright + Structure Switches on the IR-D. Both pedals have Gain and Boost trimmers on the right-hand side. And both pedals retail at $499 | €595 | £499. Still relatively compact at 165 x 140 x 58 mms, while the Simplifier X is more compact still at 125 x 105 x 65 mms - and that is wholly analog, albeit not tube-based.
These both sound amazing and are indeed very authentic representations of the Friedman Brown Eye and Dirty Shirley / Twin Sisyrt original Tube Amps they are based on - respectively JCM800 and Plexi type territory. Of course available from all the usual sources - world-wide!
IR-D Twin Tube Preamp with DSP Power Amp and IRs - $499 | €595 | £499
- Two high-voltage 12AX7 preamp tubes for rich harmonic tone
- Two independent channels with boost based on Dirty Shirley/Twin Sister circuit
- Onboard DSP IR cabinet/power amp simulation for studio-quality tone
- 13 Friedman Cabinet IRs included; load your own IRs via Friedman Editor software
- Tubes : 2 x 12AX7 preamp tubes
- Channels : Two independent identical channels + boost
- MIDI programmable features : Channel select / Boost, IR select, Thump and Presence, Effects loop ON/OFF, Boost Lock
- Power amp simulation with software editable Presence and Thump (per channel)
- Low latency Impulse Response cabinet simulation (bypassable)
- Three position CAB/IR select switch per channel (programmable via software)
- 13 free Friedman IRs or load your own
- Boost Volume and Gain controls (per channel)
- Volume and Gain controls (per channel)
- Full EQ consisting of Bass, Middle, Treble (per channel)
- 2-way Bright switch (Per Channel)
- 3-way Structure switch (Per Channel)
- Three multi-function foot switches
- Ultra-transparent series FX loop (bypassable)
- TRS balanced output
- Headphone output
- MIDI 5 pin standard connector and USB MIDI
- USB software editor - powered by SYNERGY
- Limited 3-year Warranty
- Universal 12V Power Supply Included
- 6' USB2.0 A Male to B Male cable Included
- Power Consumption : 12V DC [-] @ 800mA
- Dimensions : 165 x 140 x 58 mms
- Weight: 0.7 kg
- MAP / RRP : $499 | €595 | $499
IR-X Twin Tube Preamp with DSP Power Amp and IRs - $499 | €595 | £499
- 2 X 12AX7 Preamp Tubes
- Two Independent Channels + Boost
- Channel 1
- Channel 2
- MIDI Programmable Features:
- Channel Select / Boost
- IR Select
- Thump And Presence – Three-Way Switch Per Channel
- Effects Loop ON/OFF
- Boost Lock
- Bypassable Low Latency Impulse Response Cabinet Simulation
- Three Position CAB/IR Select Switch Per Channel (Programmable Via Software)
- Boost, Volume and Gain Controls
- Full EQ Consisting Of Bass, Middle, Treble
- 3-Way Bright Switch (Channel 1)
- 2-Way Tight Switch (Channel 2)
- Three Multi-Function Foot Switches
- Bypassable Ultra-Transparent Series FX Loop
- TRS Balanced Output
- Headphone Output
- MIDI 5 Pin Standard Connector
- USB MIDI
- USB Software Editor - Powered By SYNERGY
- Universal 12V Power Supply Included
- 6 Foot USB2.0 A Male to B Male Cable Included
- Power Consumption : 12V DC [-] @ 800mA
- Dimensions : 165 x 140 x 58 mms
- Weight: 0.7 kg
- MAP / RRP : $499 | €595 | $499